上海防盗门质量联盟

【壮雄工业】教您辨别铝合金型材质量好坏

壮雄工业铝型材及配套产品 2021-05-02 12:36:49


1、查看产品出厂合格证,注意出厂日期、规格、技术条件、企业名称和生产许可证编号。

 

2、一定要注意


铝合金型材产品的壁厚,门、窗料的产品厚度应不小于1.2mm

3、仔细察看铝合金型材表面状况,产品应色彩鲜亮,光泽好,表面不能有明显的擦划伤、气泡等缺陷。


4、注意产品表面涂层的厚度,阳极氧化铝型材产品的膜厚不低于10μm,电泳涂漆铝型材产品的膜厚不低于17μm,粉末喷涂的涂层厚度不超出40-120μm范围,氟碳漆喷涂产品应在二涂以上,不能低于30μm

 


5、日常维护时,不能用刷子等其他硬物作为清洗工具,应选择柔软的棉纱和棉布。


6、清洗时可以用水、洗涤灵和肥皂,但不能用其他有机物。

 

7、沿海地区的用户,最好选择耐蚀性能较好的电泳涂漆名铝型材、粉末喷涂铝型材或氟碳喷涂铝合金型材产品。


1, check the factory quality certificate, pay attention to the delivery date, specifications, technical conditions, enterprise name, and the production license number.


2, it is important to note


Aluminum profile product thickness, thickness of door and window materials of products should not be less than 1.2 mm.

3, studying the aluminum alloy profile surface condition, the product should be bright, good luster, surface can't have obvious defects such as scratch, bubble.


4, pay attention to the thickness of the product surface coating, anodic oxidation of aluminum products, the film thickness of not less than 10 microns, electrophoresis paint product of aluminum film thickness is below 17 microns, powder spray coating thickness is not beyond the scope of 40-120 microns, fluorocarbon spraying products should be in more than two tu, not less than 30 microns.

5, daily maintenance, can't use the brush, and other hard objects as a cleaning tool, should choose soft cotton yarn and cotton cloth.


6, when cleaning water, detergent and soap, but not in other organisms.


7 all users of the coastal areas, it is best to choose better corrosion resistance electrophoresis paint of aluminium profile, aluminum powder coating or fluorine carbon spraying aluminum profile products.

深圳壮雄科技有限公司(ZXGY)主营:工业铝型材、工业流水线铝型材、机械手铝型材、点胶机铝型材、铝型材配件、国标、欧标(常用规格铝型材,规格齐全,价格实惠)数控精加工等。服务热线:0755-29539858

Strong male technology (shenzhen) co., LTD. (ZXGY) main business: industrial aluminum extrusions, industrial assembly line and manipulator aluminum, aluminum, aluminum parts, glue national standard and European standard (commonly used specifications of aluminum, complete specifications, the price is affordable) CNC finishing, etc. Service hotline: 0755-29539858